100 × 55 cm Deep Drip Tray – 60 Litre

A deep, one-metre drip tray with a 60-litre capacity for machinery, containers and maintenance tasks where a shallow tray would require frequent emptying.

What Is This Drip Tray Designed For?

The combination of a practical 100 × 55 cm footprint and 15 cm external depth provides considerably more liquid capacity than the low-profile trays of a similar length.

Positioning a correctly sized drip tray beneath a known leak source helps contain liquid at source, protects surrounding floors and makes routine housekeeping easier. It should be inspected and emptied before collected liquid reaches the usable capacity.

Typical Uses

• beneath generators, pumps and hydraulic equipment
• under medium-sized tanks, drums or leaking containers
• for maintenance and dismantling work involving residual fluids
• in workshops, plant rooms and equipment storage areas

Why Choose This Size?

Select this tray for depth and capacity. Choose the 100 × 40 × 4 cm model when the installation has restricted clearance or only a narrow leak area.

Always measure the complete equipment or container footprint rather than relying only on its nominal width. Allow for feet, projecting fittings, hoses and the likely direction of any drip or spray.

Material and Liquid Compatibility

The tray is manufactured from recycled polypropylene, a durable, non-rusting material used for many everyday spill-containment applications. It is suitable for many oils, coolants, water-based liquids and commonly handled chemicals, but compatibility depends on the exact substance, concentration and temperature.

Check chemical compatibility before use. A drip tray is a secondary containment aid; it does not replace risk assessment, safe storage, suitable absorbents or a purpose-designed bund where legislation or site procedures require one.

Cleaning and Use

Remove collected liquid using a method appropriate to the substance. Wipe or rinse the tray after use and inspect it for damage before returning it to service. Do not mix incompatible liquids, and dispose of contaminated liquid and cleaning materials in accordance with site procedures and applicable waste requirements.

Frequently Asked Questions

What distinguishes this tray from the 100 × 40 cm model?

This model is wider and much deeper, giving it a 60-litre capacity rather than 15 litres.

Can machinery stand directly in the tray?

It may be used beneath suitably sized equipment, but load, stability and access requirements must be assessed for the individual installation.

Is a removable grid included?

No. This is an open deep tray without a grid.

Dimensions, capacities and colours are nominal or approximate. Confirm that the tray is suitable for the intended equipment, liquid and working conditions before use.