41 × 31 cm Appliance and Utility Drip Tray – 5 Litre

A practical 5-litre utility drip tray sized for small appliances, water containers and equipment that needs broader coverage than a compact drip pan.

What Is This Drip Tray Designed For?

Its 41 × 31 cm footprint provides a stable rectangular catchment area without the bulk of a deep industrial tray, making it useful on counters, shelves and floors.

Positioning a correctly sized drip tray beneath a known leak source helps contain liquid at source, protects surrounding floors and makes routine housekeeping easier. It should be inspected and emptied before collected liquid reaches the usable capacity.

Typical Uses

• beneath coffee machines, water dispensers and small appliances
• under cleaning chemical or detergent containers
• for utility rooms, kitchens and catering preparation areas
• beneath small pumps, filters and workshop equipment

Why Choose This Size?

Choose this model when width and appliance coverage matter. The 37.5 × 23 cm pan is smaller and deeper, while the 57 × 39 cm tray provides a larger industrial footprint.

Always measure the complete equipment or container footprint rather than relying only on its nominal width. Allow for feet, projecting fittings, hoses and the likely direction of any drip or spray.

Material and Liquid Compatibility

The tray is manufactured from recycled polypropylene, a durable, non-rusting material used for many everyday spill-containment applications. It is suitable for many oils, coolants, water-based liquids and commonly handled chemicals, but compatibility depends on the exact substance, concentration and temperature.

Check chemical compatibility before use. A drip tray is a secondary containment aid; it does not replace risk assessment, safe storage, suitable absorbents or a purpose-designed bund where legislation or site procedures require one.

Cleaning and Use

Remove collected liquid using a method appropriate to the substance. Wipe or rinse the tray after use and inspect it for damage before returning it to service. Do not mix incompatible liquids, and dispose of contaminated liquid and cleaning materials in accordance with site procedures and applicable waste requirements.

Frequently Asked Questions

Is this tray suitable beneath a coffee machine?

It can be suitable where the appliance footprint fits within the tray and heat, load and drainage arrangements are appropriate.

What is the nominal capacity?

Approximately 5 litres.

Can it be used in a workshop?

Yes. It can catch light leaks from small pumps, components and benchtop equipment.

Dimensions, capacities and colours are nominal or approximate. Confirm that the tray is suitable for the intended equipment, liquid and working conditions before use.