Keep Your Car Boot Clean and Organized
1.2 × 1.2 Metre Giant Car Boot Tray
A giant rigid boot tray designed to keep the load area of large estates, 4×4 vehicles, pick-ups and vans cleaner when carrying muddy, wet or soiled items.
At a Glance
- External size: 120 × 120 × 15 cm
- Internal size: 111 × 111 × 13 cm minimum
- Capacity: 144 litres
- Material: Recycled polypropylene
- Primary purpose: vehicle load-area protection for wet, muddy and soiled equipment
What Is This Drip Tray Designed For?
Unlike a thin flexible boot liner, the tray has raised 15 cm sides that can retain water, mud and loose debris rather than allowing it to spread through the vehicle.
Positioning a correctly sized drip tray beneath a known leak source helps contain liquid at source, protects surrounding floors and makes routine housekeeping easier. It should be inspected and emptied before collected liquid reaches the usable capacity.
Typical Uses
- transporting muddy boots, tools and workwear
- carrying garden waste, plant pots and bags of compost
- moving wet sports, fishing or outdoor equipment
- protecting a vehicle when travelling with dogs or other pets
Why Choose This Size?
Measure the available load floor and wheel-arch clearance before ordering. This is a very large rigid tray and is intended for vehicles with a suitably broad, accessible load area.
Always measure the complete equipment or container footprint rather than relying only on its nominal width. Allow for feet, projecting fittings, hoses and the likely direction of any drip or spray.
Material and Liquid Compatibility
The tray is manufactured from recycled polypropylene, a durable, non-rusting material used for many everyday spill-containment applications. It is suitable for many oils, coolants, water-based liquids and commonly handled chemicals, but compatibility depends on the exact substance, concentration and temperature.
Check chemical compatibility before use. A drip tray is a secondary containment aid; it does not replace risk assessment, safe storage, suitable absorbents or a purpose-designed bund where legislation or site procedures require one.
Cleaning and Use
Remove collected liquid using a method appropriate to the substance. Wipe or rinse the tray after use and inspect it for damage before returning it to service. Do not mix incompatible liquids, and dispose of contaminated liquid and cleaning materials in accordance with site procedures and applicable waste requirements.
Frequently Asked Questions
Which vehicles can take this giant boot tray?
It may suit larger estates, 4×4 vehicles, pick-ups and vans, but vehicle interiors vary. Compare the stated external dimensions with the usable load space before purchase.
Can the tray hold muddy water?
Yes. Its raised sides and 144-litre nominal capacity help contain muddy water and wet debris during transport.
Is this the same size as the industrial 1.2 metre tray?
Yes, the physical dimensions are the same. This page is written specifically for vehicle load-area protection and transport applications.
Dimensions, capacities and colours are nominal or approximate. Confirm that the tray is suitable for the intended equipment, liquid and working conditions before use.