Keep Your Floors Clean and Dry with Our Durable Drip Tray
110 × 55 cm Low-Profile Drip Tray – 25 Litre
A wide, shallow drip tray for installations that need more floor coverage than a narrow one-metre tray but cannot accommodate a deep containment sump.
At a Glance
- External size: 110 × 55 × 4 cm
- Internal size: 105 × 50 × 4 cm approximately
- Capacity: 25 litres
- Material: Recycled polypropylene
- Primary purpose: wide, shallow coverage under machinery skids and paired containers
What Is This Drip Tray Designed For?
Its 110 × 55 cm footprint protects a broad area while retaining a low 4 cm external height, making it useful where access, doors or equipment clearance limit tray depth.
Positioning a correctly sized drip tray beneath a known leak source helps contain liquid at source, protects surrounding floors and makes routine housekeeping easier. It should be inspected and emptied before collected liquid reaches the usable capacity.
Typical Uses
- beneath machinery mounted on a broad base or skid
- under paired containers or two adjacent leak points
- below workshop equipment and service benches
- in plant rooms where a 4 cm tray height reduces obstruction
Why Choose This Size?
This tray is broader than the 117 × 40 cm model and therefore better for wider equipment. The 120 × 55 cm tray provides a little more length and a 28-litre capacity.
Always measure the complete equipment or container footprint rather than relying only on its nominal width. Allow for feet, projecting fittings, hoses and the likely direction of any drip or spray.
Material and Liquid Compatibility
The tray is manufactured from recycled polypropylene, a durable, non-rusting material used for many everyday spill-containment applications. It is suitable for many oils, coolants, water-based liquids and commonly handled chemicals, but compatibility depends on the exact substance, concentration and temperature.
Check chemical compatibility before use. A drip tray is a secondary containment aid; it does not replace risk assessment, safe storage, suitable absorbents or a purpose-designed bund where legislation or site procedures require one.
Cleaning and Use
Remove collected liquid using a method appropriate to the substance. Wipe or rinse the tray after use and inspect it for damage before returning it to service. Do not mix incompatible liquids, and dispose of contaminated liquid and cleaning materials in accordance with site procedures and applicable waste requirements.
Frequently Asked Questions
What type of equipment suits this tray?
It is suited to broad machinery bases, paired containers and installations with several nearby drip points.
What is the nominal capacity?
The tray holds approximately 25 litres.
Is the 4 cm depth suitable for major spills?
It is primarily intended for drips, leaks and controlled overspill. A deeper tray or purpose-designed bund may be more appropriate for larger release scenarios.
Dimensions, capacities and colours are nominal or approximate. Confirm that the tray is suitable for the intended equipment, liquid and working conditions before use.