Keep Your Floors Clean with Our Drip Tray
120 × 55 cm Low-Profile Drip Tray – 28 Litre
A large 120 × 55 cm low-profile drip tray for broad or elongated machinery where extensive floor coverage is needed but a deep tray would interfere with access or clearance.
At a Glance
- External size: 120 × 55 × 4 cm
- Internal size: 116 × 51 × 4 cm minimum
- Capacity: 28 litres
- Material: Recycled polypropylene
- Primary purpose: maximum shallow coverage in the standard rectangular range
What Is This Drip Tray Designed For?
At 1.2 metres long and 55 cm wide, it provides the largest shallow rectangular footprint in this group, while the 4 cm height keeps the edge relatively unobtrusive.
Positioning a correctly sized drip tray beneath a known leak source helps contain liquid at source, protects surrounding floors and makes routine housekeeping easier. It should be inspected and emptied before collected liquid reaches the usable capacity.
Typical Uses
- under long generators, pumps and industrial equipment
- beneath machinery skids and service assemblies
- below several adjacent containers or leak points
- for maintenance work involving draining and residual fluids
Why Choose This Size?
This model offers more coverage and capacity than the 110 × 55 cm tray. Choose a deep 100 × 55 cm tray when liquid volume is more important than overall footprint.
Always measure the complete equipment or container footprint rather than relying only on its nominal width. Allow for feet, projecting fittings, hoses and the likely direction of any drip or spray.
Material and Liquid Compatibility
The tray is manufactured from recycled polypropylene, a durable, non-rusting material used for many everyday spill-containment applications. It is suitable for many oils, coolants, water-based liquids and commonly handled chemicals, but compatibility depends on the exact substance, concentration and temperature.
Check chemical compatibility before use. A drip tray is a secondary containment aid; it does not replace risk assessment, safe storage, suitable absorbents or a purpose-designed bund where legislation or site procedures require one.
Cleaning and Use
Remove collected liquid using a method appropriate to the substance. Wipe or rinse the tray after use and inspect it for damage before returning it to service. Do not mix incompatible liquids, and dispose of contaminated liquid and cleaning materials in accordance with site procedures and applicable waste requirements.
Frequently Asked Questions
What is the main advantage of this 120 cm tray?
It provides extended shallow coverage beneath large or long equipment while occupying only 4 cm of vertical clearance.
What is its capacity?
The nominal capacity is 28 litres.
Is it intended as a permanent bund?
It is an open drip tray for leaks and overspill, not a certified storage bund.
Dimensions, capacities and colours are nominal or approximate. Confirm that the tray is suitable for the intended equipment, liquid and working conditions before use.