58 × 40.5 cm Deep Drip Pan – 13.5 Litre

A deeper 13.5-litre drip pan for medium-sized equipment and containers where more holding capacity is needed than a standard shallow workshop tray can provide.

What Is This Drip Tray Designed For?

Its 7 cm depth increases capacity and splash retention while the 58 × 40.5 cm footprint remains manageable for bench, shelf and floor use.

Positioning a correctly sized drip tray beneath a known leak source helps contain liquid at source, protects surrounding floors and makes routine housekeeping easier. It should be inspected and emptied before collected liquid reaches the usable capacity.

Typical Uses

• beneath appliances, pumps and workshop equipment
• for draining filters, housings and mechanical parts
• under containers used for oils, coolants or compatible chemicals
• in utility, maintenance and laboratory work areas

Why Choose This Size?

This tray is close in footprint to the 57 × 39 cm model but is 2 cm deeper and holds approximately 4.5 litres more.

Always measure the complete equipment or container footprint rather than relying only on its nominal width. Allow for feet, projecting fittings, hoses and the likely direction of any drip or spray.

Material and Liquid Compatibility

The tray is manufactured from recycled polypropylene, a durable, non-rusting material used for many everyday spill-containment applications. It is suitable for many oils, coolants, water-based liquids and commonly handled chemicals, but compatibility depends on the exact substance, concentration and temperature.

Check chemical compatibility before use. A drip tray is a secondary containment aid; it does not replace risk assessment, safe storage, suitable absorbents or a purpose-designed bund where legislation or site procedures require one.

Cleaning and Use

Remove collected liquid using a method appropriate to the substance. Wipe or rinse the tray after use and inspect it for damage before returning it to service. Do not mix incompatible liquids, and dispose of contaminated liquid and cleaning materials in accordance with site procedures and applicable waste requirements.

Frequently Asked Questions

How does this differ from the 57 × 39 cm tray?

It is slightly larger and deeper, increasing nominal capacity from 9 litres to 13.5 litres.

Is it suitable for draining components?

Yes. The deeper sides are useful when parts retain a meaningful amount of residual fluid.

Can it hold chemicals?

It is compatible with many commonly handled liquids, but the exact chemical must be checked against polypropylene before use.

Dimensions, capacities and colours are nominal or approximate. Confirm that the tray is suitable for the intended equipment, liquid and working conditions before use.