• 80 x 80cm Drip Tray Drip and Spill Trays, 71 to 80cm Trays, Bilge Drip Trays image

80 x 80cm Drip Tray

80 × 80 cm High-Capacity Square Drip Tray – 75 Litre

A high-capacity square drip tray for equipment and containers that need broad coverage and deeper containment without moving up to a full one-metre footprint.

At a Glance

  • External size: 80 × 80 × 12 cm
  • Internal size: 71 × 71 × 12 cm minimum
  • Capacity: approximately 75 litres
  • Material: Recycled polypropylene
  • Primary purpose: high-capacity square containment below compact generators, tanks and plant

What Is This Drip Tray Designed For?

The 80 cm square footprint is easier to accommodate than the one-metre tray, yet the 12 cm depth still provides approximately 75 litres of nominal capacity.

Positioning a correctly sized drip tray beneath a known leak source helps contain liquid at source, protects surrounding floors and makes routine housekeeping easier. It should be inspected and emptied before collected liquid reaches the usable capacity.

Typical Uses

  • beneath compact generators and square machinery bases
  • under tanks, pumps and water-treatment equipment
  • for plant maintenance and temporary fluid containment
  • in workshops, stores and utility areas

Why Choose This Size?

Choose this open tray when equipment can stand within the base and no grid is required. The 80 × 80 cm bunded drum tray includes a removable grid to keep a container above collected liquid.

Always measure the complete equipment or container footprint rather than relying only on its nominal width. Allow for feet, projecting fittings, hoses and the likely direction of any drip or spray.

Material and Liquid Compatibility

The tray is manufactured from recycled polypropylene, a durable, non-rusting material used for many everyday spill-containment applications. It is suitable for many oils, coolants, water-based liquids and commonly handled chemicals, but compatibility depends on the exact substance, concentration and temperature.

Check chemical compatibility before use. A drip tray is a secondary containment aid; it does not replace risk assessment, safe storage, suitable absorbents or a purpose-designed bund where legislation or site procedures require one.

Cleaning and Use

Remove collected liquid using a method appropriate to the substance. Wipe or rinse the tray after use and inspect it for damage before returning it to service. Do not mix incompatible liquids, and dispose of contaminated liquid and cleaning materials in accordance with site procedures and applicable waste requirements.

Frequently Asked Questions

How does this differ from the 80 × 80 cm bunded drum tray?

This is an open tray without a grid. The bunded version uses a removable grid to support a container above the sump.

What is the internal footprint?

The minimum internal dimensions are approximately 71 × 71 cm.

What capacity does it provide?

Approximately 75 litres.

Dimensions, capacities and colours are nominal or approximate. Confirm that the tray is suitable for the intended equipment, liquid and working conditions before use.

martin peters 30/11/-0001

good product but been great if a size to fit generator was available

Showing 1 to 1 of 1 (1 Pages)

Write a review

Please login or register to review

80 x 80cm Drip Tray

  • Brand: SERPRO
  • Product Code: TRAY-80x80
  • Availability: In Stock
  • £33.48


Tags: 80cm, drip, tray