Premium Quality Drip Tray for Spills and Leaks
1.2 × 1.2 Metre Industrial Drip Tray
A large, deep-sided square drip tray for protecting floors beneath machinery, tanks, plant and grouped containers where broad coverage and substantial liquid capacity are required.
At a Glance
- External size: 120 × 120 × 15 cm
- Internal size: 111 × 111 × 13 cm minimum
- Capacity: approximately 144 litres
- Material: Recycled polypropylene
- Primary purpose: large square floor protection beneath machinery, tanks and grouped containers
What Is This Drip Tray Designed For?
Its square footprint covers equipment that is too wide for a conventional rectangular tray, while the 15 cm external depth provides useful containment for persistent leaks and larger accidental releases.
Positioning a correctly sized drip tray beneath a known leak source helps contain liquid at source, protects surrounding floors and makes routine housekeeping easier. It should be inspected and emptied before collected liquid reaches the usable capacity.
Typical Uses
- beneath large pumps, compressors and workshop machinery
- under tanks, containers or several smaller vessels grouped together
- in maintenance bays, plant rooms and storage areas
- as a temporary controlled area for wet or leaking equipment
Why Choose This Size?
Choose this industrial version when the principal requirement is workplace spill containment. For protecting a vehicle load area from muddy or wet items, use the separately described giant car boot tray.
Always measure the complete equipment or container footprint rather than relying only on its nominal width. Allow for feet, projecting fittings, hoses and the likely direction of any drip or spray.
Material and Liquid Compatibility
The tray is manufactured from recycled polypropylene, a durable, non-rusting material used for many everyday spill-containment applications. It is suitable for many oils, coolants, water-based liquids and commonly handled chemicals, but compatibility depends on the exact substance, concentration and temperature.
Check chemical compatibility before use. A drip tray is a secondary containment aid; it does not replace risk assessment, safe storage, suitable absorbents or a purpose-designed bund where legislation or site procedures require one.
Cleaning and Use
Remove collected liquid using a method appropriate to the substance. Wipe or rinse the tray after use and inspect it for damage before returning it to service. Do not mix incompatible liquids, and dispose of contaminated liquid and cleaning materials in accordance with site procedures and applicable waste requirements.
Frequently Asked Questions
What is this 1.2 metre drip tray best used for?
It is best suited to broad machinery bases, tanks, grouped containers and maintenance work that requires a large protected footprint.
Can it be used with oils and chemicals?
Recycled polypropylene is compatible with many oils, coolants and commonly handled liquids. Confirm compatibility before use with a specific aggressive chemical.
Is it a bunded pallet?
No. It is an open drip tray without a raised grid and should not be described as a certified bunded pallet.
Dimensions, capacities and colours are nominal or approximate. Confirm that the tray is suitable for the intended equipment, liquid and working conditions before use.