Keep Your Floors Clean and Dry with Our Convenient Drip Tray
1 Metre × 1 Metre Deep Square Drip Tray – 100 Litre
A one-metre square, 100-litre drip tray for broad machinery, tanks and maintenance work requiring a large protected area with meaningful liquid depth.
At a Glance
- External size: 100 × 100 × 12 cm
- Internal size: 91.5 × 91.5 × 12 cm minimum
- Capacity: 100 litres
- Material: Recycled polypropylene
- Primary purpose: high-capacity square containment for broad equipment footprints
What Is This Drip Tray Designed For?
The square layout is useful where leaks may occur around all sides of equipment rather than along a single narrow edge, while the 12 cm depth provides high-capacity containment.
Positioning a correctly sized drip tray beneath a known leak source helps contain liquid at source, protects surrounding floors and makes routine housekeeping easier. It should be inspected and emptied before collected liquid reaches the usable capacity.
Typical Uses
- beneath square or wide machinery bases
- under tanks, water treatment equipment and grouped containers
- for engine, plant and equipment maintenance
- in workshops, storage areas and plant rooms
Why Choose This Size?
This tray is smaller and easier to position than the 1.2 × 1.2 metre model, but still provides a substantial 100-litre nominal capacity.
Always measure the complete equipment or container footprint rather than relying only on its nominal width. Allow for feet, projecting fittings, hoses and the likely direction of any drip or spray.
Material and Liquid Compatibility
The tray is manufactured from recycled polypropylene, a durable, non-rusting material used for many everyday spill-containment applications. It is suitable for many oils, coolants, water-based liquids and commonly handled chemicals, but compatibility depends on the exact substance, concentration and temperature.
Check chemical compatibility before use. A drip tray is a secondary containment aid; it does not replace risk assessment, safe storage, suitable absorbents or a purpose-designed bund where legislation or site procedures require one.
Cleaning and Use
Remove collected liquid using a method appropriate to the substance. Wipe or rinse the tray after use and inspect it for damage before returning it to service. Do not mix incompatible liquids, and dispose of contaminated liquid and cleaning materials in accordance with site procedures and applicable waste requirements.
Frequently Asked Questions
What fits inside the one-metre square tray?
The minimum internal footprint is approximately 91.5 × 91.5 cm. Check the complete equipment base, feet and access requirements before ordering.
How does it differ from an 80 × 80 cm tray?
It provides a larger footprint and a 100-litre capacity, compared with approximately 75 litres for the 80 × 80 cm tray.
Can it be used outdoors?
Polypropylene is suitable for many environments, but the tray should be managed so rainwater does not consume the available spill capacity.
Dimensions, capacities and colours are nominal or approximate. Confirm that the tray is suitable for the intended equipment, liquid and working conditions before use.